
We are an authorized dealer for Key Hose products and can only sell within New York State.
KEY HOSE DURA-FLOW
The lightweight, small diameter, rubber-covered attack hose that packs a big punch.
The heat and chemical-resistant nitrile/PVC through-the-weave design provide peak performance and maximum flow. With a test pressure of 600 psi, Dura‑Flow clearly outperforms conventional rubber-covered attack lines.
A rugged, thick-ribbed outer jacket construction makes the hose highly resistant to kink, impact, punctures, cuts, and abrasion.
Ozone resistant, maintenance-free, and no drying required, make Dura-Flow a reliable weapon in a firefighter’s arsenal. NFPA compliant and UL listed.
Colors
Features
- Lightweight, greater flexibility, and virtually kink-free
- Raised thick rib construction, resists cuts, punctures, impact, and abrasion
- Through-the-weave design for increased durability
- Heat, chemical, and ozone resistant
- Easy to clean, easy to pack
- *Manufacturer’s 10-year warranty
Specifications
Diameter
|
Part No.
|
Service Test
|
Proof Test
|
Burst Test
|
Bowl Size
|
Weight Uncoupled
|
1"
|
RC10-600
|
300 psi
|
600 psi
|
900 psi
|
13⁄16"
|
0.15 lbs/ft
|
1½"
|
RC15-600
|
300 psi
|
600 psi
|
900 psi
|
113⁄16"
|
0.24 lbs/ft
|
*1¾"
|
RC17-600
|
300 psi
|
600 psi
|
900 psi
|
115⁄16"
|
0.28 lbs/ft
|
2"
|
RC20-600
|
300 psi
|
600 psi
|
900 psi
|
2¼"
|
0.32 lbs/ft
|
*2½"
|
RC25-600
|
300 psi
|
600 psi
|
900 psi
|
213⁄16"
|
0.48 lbs/ft
|
*UL Listed to 250 psi
-
Dura-Flow is made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type.
-
Dura-Flow is guaranteed to withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg) without exposing the liner.
-
Dura-Flow coupling options are as required by the purchaser, expansion ring threaded, Storz clamp ring, etc. Barcode recess is available at an additional charge.
-
The minimum burst test pressure when tested in accordance with NFPA 1961 on all Dura‑Flow diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with the current minimum requirements of NFPA 1962.
Manufacturer’s Warranty Information
*Dura-Flow hose shall carry a manufacturer’s 10-year written warranty against defects in materials and workmanship.
Note:
1” thru 3” is supplied with NH (NST) aluminum couplings.
Custom lengths and special threads are available; please call Fire-End at 800-759-3473 for pricing.
Spec Sheet